For all your Measurement Needs

Load, Pressure, Torque, LVDT   I   Acoustics & Vibration   I   Position, Disp, Speed & Acceleration   I   Thermal Systems

  Accelerometers

 
Accelerometers
Accelerometers
 

Piezoelectric Accelerometer
General purpose Accelerometer

  • Ranges: ±5 g to ±5000 g 
  • Sensitivity: 1mV/g to 1000mV/g
Miniature Accelerometer
  • Ranges:  ±10 g to ±5000 g
  • Sensitivity: 1mV/g to 500mV/g 
Tri Axial Accelerometer
  • Ranges:  ±5 g to ±5000 g
  • Sensitivity: 1mV/g to 1000mV/g

  Triaxial Accelerometer Module

 
Triaxial Accelerometer
 

Specifications:

  • 3 axis acceleration sensing, Capacitive Micro machined, Nitrogen damped
  • acceleration ranges ±5 g, ±10 g, ±25 g, ±50 g, ±100 g, ±200 g, ±400 g
  • ±4V Differential Output or 0.5 V to 4.5 V Single Ended Output
  • Digital pulse density output
  • -55 to +125° C Operation
  • +5 V DC Power
  • Simple, Four Wire Connection

  Single Axis Surface Mount Accelerometer

 
Single Axis Surface Mount Accelerometer
Single Axis Surface Mount Accelerometer
 

Specifications:

  • Capacitive Micro machined, Nitrogen damped and hermetically seal acceleration ranges ±5 g, ±10 g, ±25 g, ±50 g, ±100 g, ±200 g, ±400 g
  • Nitrogen Damped & Hermetically Sealed
  • ±4 V Differential Output or 0.5 V to 4.5 V Single Ended Output
  • Digital Pulse Density Output
  • Fully Calibrated, Responds to DC and AC Acceleration

  Single Axis Accelerometer Module

 
Single Axis Accelerometer Module
Single Axis Accelerometer Module
 

Specifications:

  • Capacitive Micro machined, Nitrogen damped acceleration range ±5 g, ±10 g, ±25 g, ±50 g, ±100 g, ±200 g, ±400 g
  • ±4 V Differential Output or 0.5 V to 4.5 V Single Ended Output
  • Digital pulse density output
  • -55 to +125° C Operation
  • +5 V DC Power
  • Simple, Four Wire Connection

  Microphone

 
Microphones
Microphones
 

ICCP & TEDS Microphones
¼” ICCP & TEDS Microphones

  • Frequency Response: 20Hz ~ 16kHz, 20Hz ~ 70kHz
  • Sensitivity: 5mV/Pa , 10mV/Pa
  • Equivalent Noise level: <40dB (A)
  • Max. SPL for 3% THD: 130dB, 160dB
½” ICCP & TEDS Microphones
  • Frequency Response: 20Hz ~ 12.5kHz, 20Hz ~ 20kHz
  • Sensitivity: 40mV/Pa 
  • Equivalent Noise level: 18dB (A), 20dB (A)
  •  Max. SPL for 3% THD: 130dB, 132dB

  Integrating Octave Band Digital Sound Level Meter

 
Integrating Octave Band Digital Sound Level Meter
Integrating Octave Band Digital Sound Level Meter
 

Applications:

  • Real-time measurement of octave bands
  • Used for the selection of hearing protection (Octave or HML Methods)
  • Full color display, simple to operate
  • Single measurement range even in octave modes
  • IEC 61762 Class 1 or Class 2 models available
  • Measures all workplace noise parameters simultaneously
  • Acoustic Calibrator, Class 1 & 2 accuracy versions

  Digital Sound Level Meter

 
Digital Sound Level Meter
Digital Sound Level Meter
 

Applications:

  • General noise measurements
  • High resolution display, Simple operation
  • Measures average levels (Leqand Lavg)
  • Stores time history levels
  • Maximum hold function, IEC 61672 Class 2 compliance

  Vibration Meter

 
Vibration Meter
Vibration Meter
 

Applications:

  • Measures Whole-Body and Hand-Arm Vibration exposure
  • Simultaneously measures tri-axial vibration levels, RMS and Peak
  • Calculates and stores overall and time history data, daily exposure A (8) and VDV
  • Vibration input signal and 1/3 octave spectrum recording (with expert pack)
  • Up to 20-hour run time with Lithium-Ion rechargeable battery

  AMS 8200 - Vibration Meter

 
AMS 8200 - Vibration Meter
AMS 8200 - Vibration Meter
 

Technical Specifications:
Frequency range            : 10 Hz - 1 kHz,
Velocity range                  : 200 mm/s. 
Acceleration range            : 200 m/s^2
Measurement Range         : 30dB ~ 130dB
Display                            : 61 mm x 34 mm super large 
                                       LCD Display
Accuracy                         : ± ( 5 % + 2 d ) reading, 
                                       @ 160 Hz, 80 Hz
                                       @ 23 ± 5 ℃
Circuit                            : Exclusive microcomputer circuit.
Data hold                       : Freeze the desired reading Peak hold                                                 : To measure the peak value Memory                                                   : Maximum & Minimum value                         Power off                       : Auto shut off, saves battery Life
Operating Temperature    : 0℃ to 50℃ ( 32˚F to 122˚F ).
Operating Humidity         : Less than 80% RH.
Data output                    : RS 232 serial output, isolate

  Personal Air Sampling Pumps-Atex Approved

 
Personal Air Sampling Pumps-Atex Approved
Personal Air Sampling Pumps-Atex Approved
 

Applications:

  • Comprehensive range of models
  • Robust and reliable design for harsh environments
  • Rubber over-moulded sealed case, Digital flow control
  • Convenient drop in charging/storage system
  • Intelligent battery management and diagnostics
  • Visible replaceable inlet filter
  • Intrinsically safe models available for mining applications (M1 certified)

  Particle Velocity Sensor

 
Particle Velocity Sensor
Particle Velocity Sensor
 

  • Support of particle velocity sensor and classical sound intensity probe
  • Due to a special technique used for the visualization of the results no regular mesh of measurement points is needed. Detailed measurements are performed only where it is really necessary
  • Intermediate results may be displayed at any time–already during the measurement
Perfect for:
  • Measurements indoors and outdoors
  • Acoustic measurements in all industrial areas
  • Instant results

  Acoustic Holography

 
Acoustic Holography
Acoustic Holography
 

  • Analysis using beam forming (delay and sum) or near field acoustic holography (SONAH)
  • Enhancements to beam forming for optimal resolution at low frequencies, e.g. the Capon method or the MUSIC algorithm
  • Further algorithms may be seamlessly integrated due to the open programme structure and the easy to use lab view interface
  • Convenient documentation of measurements and analysis results by direct transfer to MS Office

 

Industrial Sensors

 
Wheel Load Scale
Wheel Load Scale
 
Drift Pull System
Drift Pull System
 

Data Acquisition Systems

 
Data Acquisition Software
Data Acquisition Software
 
PCI Analog I/O
PCI Analog I/O
 

PC & Work Station

 
Multimedia Panel PC
Multimedia Panel PC
 
Industrial Display
Industrial Display